American Tooling Center, Inc.
American Tooling Center, Inc.
Phone: (517) 522-8411
Fax: (517) 522-8078
info@AmericanToolingCenter.com
Diversified Tooling Group - Your Full Service Tool and Die Operation

PRESS TRYOUT DEPARTMENT

American Tooling Center, Inc. is proud to announce the acquisition of four 180"x96" major mechanical Danly presses. The installation of these presses will include a new press pit, 80 x 220 ft. building addition, and 50/20 ton crane. This additional capacity for die tryout and low volume parts production is available.

PRESS W1 - Danly DU4-2000-1250-180-96 Quick Die Change Straight Side Press (Double Action)
180" x 96" Bed Area, 36" Stroke, 85" Shut Height to Bed, 24" Adjustment, 16" Effective Draw, 12 SPM Continuous, 9.6 SPM Single Stroke, 17" Thick Rolling Bolster, Autotech Programmable Limit Switch, Tonnage Monitor, Serial No. 69287402,(1971)

PRESS W2 - Danly SU4-1000-180-96 Straight Side Press
1000 Ton, 180" x 96" Bed Area, 36" Stroke, 84" Shut Height to Bed, 30" Adjustment, 16 SPM Continuous, 13 SPM Single Stroke, 12" Thick Rolling Bolster, (3)Cushions in Bed, Autotech Programmable Limit Switch, Tonnage Monitor, Serial No. 69287201,(1971)

PRESS W3 - Danly SU4-1250-180-96 Straight Side Press
1250 Ton, 180" x 96" Bed Area, 36" Stroke, 84" Shut Height to Bed, 30" Adjustment, 16 SPM Continuous, 13 SPM Single Stroke, 12" Thick Rolling Bolster, (3) Cushions, Autotech Programmable Limit Switch, Tonnage Monitor
Serial No. 69287501,(1971)

PRESS W4 - Danly SU4-1250-180-96 Straight Side Press
1000 Ton, 180" x 96" Bed Area, 40" Stroke, 84" Shut Height to Bed, 30" Adjustment, 16 SPM Continuous, 13 SPM Single Stroke, 12" Thick Rolling Bolster, (3) Cushions Autotech Programmable Limit Switch, Tonnage Monitor
Serial No. 73317404,(1971)

PRESS W5 - Danly SU4-1250-180-96 Straight Side Press
1000 Ton, 180" x 96" Bed Area, 40" Stroke, 84" Shut Height to Bed, 30" Adjustment, 16 SPM Continuous, 13 SPM Single Stroke, 12" Thick Rolling Bolster, (3) Cushions Autotech Programmable Limit Switch, Tonnage Monitor
Serial No. 71303101,(1971)

(1) DU-4-1250-700-132-84-Danly Toggle Press
Total press capacity 1950 tons
Bed size 132" X 84"

(1) TU-4-800-132-84-Danly Toggle Press
Total press capacity 1600 tons
Bed size 132" X 84"

(1) TU-4-800-132-84-Danly Toggle Press
Total press capacity 1600 tons
Bed size 132" X 84"

(2) B4-900-124-84-Clearing Straight Side Press
Total press capacity 900 tons
Bed size 124" X 84"
Air cushions 10" stroke

(5) U-4-800-124-84-Danly Straight Side Press
Total press capacity 800 tons
Bed size 124" X 84"
3 w/air cushions 10" stroke

(1) Clearing Hydraulic Press
Total press capacity 250 tons
Bed size 80" X 152"

TONNAGE MONITORS
(4) Shut Height Monitors (one on each toggle press).

(4) Toledo Transducer Tonnage Monitors
w/computer watch system (one on each toggle press).

(11) Rexcon Tonnage Monitors on all straight side presses.
PRESS TRYOUT DEPARTMENT

PRESS TRYOUT DEPARTMENT

PRESS TRYOUT DEPARTMENT


Diversified Tooling Group: Superior CAM Midland Design Service Bespro Pattern American Tooling Center
This document maintained by sek@DiversifiedToolingGroup.com.
Material Copyright 2005 Diversified Tooling Group